Thông tin chi tiết
Network Interface
- IEEE 802.3u 100BASE-Tx
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3z 1000BASE-ZX/LHX/LX/SX
- SFP mini GBIC
ADSL/ADSL2/ADSL2+ Interface
- G.992.1 Annex A
- G.992.3 Annex A, Annex L, Annex M
- G.992.5 Annex A, Annex M
- G.994.1 G.hs
- G.992.3, G.992.5, G.997.1 Spectral Mask
- G.992.3 and G. 992.5 ATM Transmission Convergence (ATM-TC) function
- EOC defined in ITU-T G.992.3 and ITU-T G.997.1
- Latency path function specified in ITU-T G.992.3 and G.992.5
- Loop diagnostic function (SELT & DELT) specified in ITUT G.992.3 and G.992.5
- Power management capability specified in ITU-T G.992.3 and G.992.5
- Seamless Rate Adaptation (SRA) on-line configuration
- Impulse Noise protection (INP) specified in ITU-T G.992.3 and G.992.5
ATM Functionality
- 8 VPC/VCC per DSL port
- UBR, CBR, rt-VBR, nrt-VBR, ABR QoS Mechanisms
- ATM Forum TM 4.0 peak cell rate traffic parameter
- Downstream traffic shaping per ATM PVC
- ATM F5 OAM cells for End-to-End Loop back test (ITU-T Rec. I.610)
- G.998.1 multi-pair ATM bonding (*)
- Support 64k PVC
L2 Bridging
- 802.1d and 802.w RSTP
- Max MAC address per system : 14K
- Max MAC address per port : 128
- Auto MAC address learning
- Block duplicate MAC address (MAC address spoofing)
- Configurable MAC aging-out time
- Limiting number of MACs per port
- Static MAC address filtering
- User Isolation (per system)
VLAN & VLAN Bridge Functions
- Provide 1024 configurable VLANs with 4K VLAN tagging
- The VLAN tagging complies with IEEE 802.1Q
- GVRP function
- 128 VLAN +MAC per DSL port
- VLAN bridge function (multiple PVCs to one VLAN)
- VLAN cross connect (PVC to VLAN one to one mapping)
- VLAN trunking (single PVC join multiple VLAN)
- IEEE 802.1ad provider bridge (Q-in-Q)
QoS
- Configurable IEEE 802.1p priority queue function and support 4 levels
- Configurable mapping function between ATM PVC and 802.1p priority queue
- TOS/DSCP to IEEE 802.1p p-bit mapping in the network interface
- Upstream rate limiting by ACL in the DSL port
- Strict Priority queuing in the network interface
IP Functionality
- RFC2684 bridged mode multicast service
- RFC2684 routing mote support
- ICMP function support
- PPPoA forwarding
- DHCP relay agent option 82 (circuit ID and Remote ID)
- DHCP snooping
- IEEE 802.1x
- IPSec/L2TP/PPTP VPN pass-through function
- RFC2516 PPPoE packet forwarding function
Packet Filtering
- Discard downstream broadcast
- Control downstream broadcast
- Source MAC address filtering (pass or deny)
- PPPoE filtering
- Layer 3 filtering based on IP header : Src addresses, dest addresses, protocol ID, UDP / TCP port number
- ARP broadcast Filtering
- Downstream broadcast enable/disable ( per-VLAN, per-port)
- NetBIOS filtering
- DHCP broadcast filtering
- IGMP filtering
- Block BPDU/ARP/LACP/GMRP/upstream pause frame on DSL side
Multicast Capability
- Internet Group Management Protocol (IGMP) version 2 specified in RFC2236
- VLAN-aware IGMP snooping/IGMP proxy
- Multicast VLAN support
- 512 multicast groups
- 50 copies for each multicast group
- Number of zap per second per system : >30
- Expedite leave : < 250 ms
- Multicast bandwidth control
- IGMP membership report
- Static multicast forwarding
- Multicast address filtering profile
- Load protection for IGMP
VoIP Services
- SIP v2 singling protocol and H.248 version 2(*)
- Voice CODEC : G.711 a/µ, G.726, G.729 a/b G.723.1
- Configurable jitter buffer
- Generation of dial tone, second dial tone, ringing tone (ring-back tone), busy tone, off-hook warning tone
- DTMF detection and generation (bi-directional)
- In-Band and Out-of-Band (RFC 2833), (SIP INFO)
- FAX/Modem pass through (T.38) via RTP
- call waiting, call hold, call transfer
- Local dial available(*)
- MLT (Metallic loop testing for subscriber lines) – GR909 and GR844
Management
- Local management through a craft terminal
- In-band IP interface for managing the Network
- SNMP (Simple Network Management Protocol) v1.0 & v2c (RFC1157)
- The management activities can be performed by SNMP operations
- Support SNMP MIB(s)
- standard SNMP traps so that these traps can be reported to other NMSs
- Centralized Management Software — NetAtlas Access supporting
MIB Support
- RFC1213 SNMP MIB II
- RFC1493 Bridge MIB
- RFC1643 Ethernet MIB
- RFC2674 Q MIB
- RFC2662 ADSL line MIB
- ADSLx line MIB
- RFC1757 RMON MIB, group 1,2,3,9
- ZyXEL proprietary MIB
Hardware Specifications
- Two TELCO-50 connectors for 48-port ADSL/ADSL2/ADSL2+
- One mini RJ11 console port for local management
- Two 100Base-TX/1000Base-T or two mini GBIC for uplink/subtending
- One DB9 for 3 in and 1 out alarm contact
- Hot-swappable fan module
- DC Input connector
- One power switch
- Two RJ-45 ports for loop test out and test in functionality
Power Requirements
- Voltage: DC power input (-36V DC ~ -72VDC)
- Power consumption : max. 170 Watts
Physical Specifications
- 19” and 23” Rack-mountable
- Dimensions: 439.8 (W) x 251 (D) x 66 (H) mm
- Swappable FAN module
- Built-in splitter
- Side-slip dust filter
- Weight: 8.2 Kg
Environmental Specifications
- Operating Temperature: -40°C ~ 65°C
- Storage Temperature: -40°C ~ 70°C
- Operating Humidity: 10% ~ 95% (noncondensing)
- Storage Humidity: 5% ~ 95% (non-condensing)
Certification
- EMC/ESD:
- Safety:
- Reliability: ETS 300 019
- NEBS Compliant (*)
FCC part 15 Class A; -EN 55022, EN 55024 Class A; ETS 300 386
ITU-T K.20, Appendix C; -CSA 60950; -EN 60950; IEC 60950; UL 60950
Sản phẩm khác